12 KiB
NCC Documentation
This document serves the purpose of presenting the documentation for using/developing NCC, from basic installation, basic usage, standards and much more.
Table of contents
- NCC Documentation
- Building NCC from source
- Installing NCC
- Uninstalling NCC
- Projects
- Naming a package
Introduction
This section serves the basic introduction of NCC, what it's used for and how you can use it in your own projects or use it to run and build other projects that are designed to be used with NCC.
What is NCC?
NCC (Acronym for Nosial Code Compiler) is a multi-purpose compiler, package manager and toolkit. Allowing projects to be managed and built more easily without having to mess with all the traditional tools that comes with your language of choice. Right now NCC only supports PHP as it's written in PHP but extensions for other languages/frameworks can be built into the software in the future when the need comes for it.
NCC can make the process of building your code into a redistributable package much more efficient by treating each building block of your project as a component that is interconnected in your environment instead of the more popular route taken by package/dependency managers such as composer,npm or pypi (or pip).
Building NCC from source
Building NCC from source is easy with very few requirements to start building. At the moment ncc can only be debugged or tested by building a redistributable source and installing it.
Requirements to build
- php8.0+
- php-mbstring
- php-ctype
- php-common (covers tokenizer & posix among others)
- make
- phpab
- tar (optional)
Installing phpab
phpab is also known as PHP Autoload Builder, phpab is an open source tool used for creating autoload files, ncc needs this tool in order to generate it's autoload files whenever there's any changes to its source code.
This tool is only required for building and or creating a redistributable package of ncc. This component is not required to be installed to use ncc.
for some components that require static loading, ncc will automatically load it using its own autoloader
The recommended way to install phpab is by using phive, if you don't have phive installed you can install it by running these commands in your terminal (from the official documentation)
wget -O phive.phar https://phar.io/releases/phive.phar
wget -O phive.phar.asc https://phar.io/releases/phive.phar.asc
gpg --keyserver hkps://keys.openpgp.org --recv-keys 0x9D8A98B29B2D5D79
gpg --verify phive.phar.asc phive.phar
chmod +x phive.phar
sudo mv phive.phar /usr/local/bin/phive
Once phive is installed, you can run the final command to install phpab
sudo phive install phpab --global
or you can run this command to install it locally
phive install phpab
Note: Optionally, you may want to have phab
available in your $PATH
, this can be done with this command.
(Replace x.xx.x
with your version number) this is if you installed it locally
ln -s /home/user/.phive/phars/phpab-x.xx.x.phar /usr/local/bin/phpab
Building NCC
First, navigate to the main directory of NCC's source code where the Makefile is present. If you
already attempted to or had built ncc before, it's recommended to use make clean
before building.
Redist
Running redist
from the Makefile will generate all the required autoloader for ncc and move all the required files
into one redistributable source folder under a directory called build/src
make redist
Tar
Running tar
will run redist before packaging the redistributable source into a tar.gz file that can be distributed to
other machines, this process is not a requirement.
make tar
Once you have a populated build/src
folder, you can simply run execute the installer
file to install your build of
ncc onto the running machine.
Installing NCC
Installing NCC is easy, you can either download the redistributable source from the releases page or you can build it from source using the instructions above.
Once you have the redistributable source, you can simply run execute the INSTALL
file to install ncc onto the running
machine.
Command line arguments
The installer accepts a few command line arguments that can be used to customize the installation process.
--help
Displays the help message
--auto
Automatically installs ncc without asking for user input.
Note: To install composer along with ncc, you must also provide the --install-composer
argument.
--install-composer
Installs composer along with ncc. By default, ncc will not install composer and during the
installation process you will be asked if you want to install composer along-side ncc, this will not conflict
with any existing composer installation.
--install-dir
Specifies the directory where ncc will be installed to. By default, ncc will be installed to /etc/ncc
--bypass-cli-check
Bypasses the check in the installer that checks if the installer is being run from the command
line, this is useful if you want to install ncc from a script.
--bypass-checksum
Bypasses the checksum check in the installer, this is useful if you made modifications to the
installation files and want to install a modified version of ncc.
But this isn't recommended and the proper way to do this is to modify the source code and build ncc from source, the Makefile task will automatically rebuild the checksum file for you.
Uninstalling NCC
Uninstalling NCC is easy, simply delete the directory where ncc was installed to, by default this is /etc/ncc
.
Note:
- To delete all the data that ncc has created, you can also delete the
/var/ncc
directory. - Finally, remove the symlink that was created in
/usr/local/bin
to thencc
entry point file.
Projects
A project is a directory that contains all the source files to your program, it's similar to a workspace in other IDEs.
Usually contains a project.json
file which contains all the information about the project that ncc needs to know.
This can include the name of the program, the version of the program, the author of the program, the dependencies of the program, build configurations, and more.
This section will cover the basics of creating a project and managing it and the technical details of the project.json
file.
Creating a project
This is the first step in using ncc, you must create a project before you can do anything else (not really because you can install packages without needing to create a project and run them directly, but you get the point)
The NCC command-line tool provides a management command called project
that can be used to create a new project
or to manage an existing project.
ncc project create --package "com.example.program" --name "Example Program"
This command will create a new project in the current directory, the --package
argument specifies the package name of
the project, this is used to identify the project and to avoid conflicts with other projects that may have the same name.
The --name
argument specifies the name of the project, this is used to display the name of the project in the project
manager and in the project settings. This doesn't have to be the same as the package name or unique.
Note: If the options are not provided, the command will prompt you for the package name and the project name.
For more information about the project command, you can run ncc project --help
to display the help message.
project.json structure
The project.json
file is a JSON file that contains all the information about the project.
When a project is created, the project.json
file is automatically created and populated with the default values, you
can modify this file to change the default values or to add more information about the project.
This section will go over the structure of the project.json
file and what each field does.
project
The project
field contains information about the project, such as what compiler extension to use, options to pass on
to the compiler, and more.
Name | Type | Required | Description |
---|---|---|---|
compiler | project.compiler | Yes | The compiler extension that the project uses to compile the program |
options | array |
No | An array of options to pass on to the compiler, the options vary depending on the compiler and NCC |
update_source | project.update_source |
No | The source for where the program can fetch updates from |
project.compiler
The project.compiler
field contains information about the compiler extension that the project uses to compile
the program.
Name | Type | Required | Description |
---|---|---|---|
extension | string |
Yes | The name of the compiler extension that the project uses to compile the program |
minimum_version | string |
No | The minimum version of the compiler extension that the project requires to compile the program |
maximum_version | string |
No | The maximum version of the compiler extension that the project requires to compile the program |
Naming a package
NCC Follows the same naming convention as Java's naming convention. The purpose of naming a package this way is to easily create a "Name" of the package, this string of information contains
- The developer/organization behind the package
- The package name itself
Naming conventions
Package names are written in all lower-case due to the fact that some operating systems treats file names
differently, for example on Linux Aa.txt
and aa.txt
are two entirely different file names because of the
capitalization and on Windows it's treated as the same file name.
Organizations or small developers use their domain name in reverse to begin their package names, for example
net.nosial.example
is a package named example
created by a programmer at nosial.net
Just like the Java naming convention, to avoid conflicts of the same package name developers can use something
different, for example as pointed out in Java's package naming convention developers can instead use something
like a region to name packages, for example net.nosial.region.example
References
For Java's package naming conventions see Naming a Package
from the Oracle's Java documentation resource, as the same rules apply to NCC except for some illegal naming
conventions such as packages not being able to begin with int
or numbers